Specifications Data ID ESD Cleanscan

Physical Characteristics

Dimensions: 6.7" H x 3.4" D x 2.8" W/167 mm, H x 85 mm D x 70 mmW
Weight: 5.5 oz /156 gm without cable
Laser Class: CDRH Class II, IEC 825 Class II, IEC 825 Class I
Voltage: 00: 4.75-14 VDC; LS 2104: 120 mA Typical, 160 mA peak;
06: 120 mA Typical, 180 mA peak
Power Sources: 00: Power supplied by Interface controller; 04: Host
power or 9 volt battery which yields over 10,000 scans. 06: Host power or optional power supply is available
Cable: Removable 6 ft/1.8 m Cable - Standard

Performance Characteristics
Scanner Type: Bi-Directional, Retrocollective
Light Source: 670 nm visible laser diode
Scan Rate: 36 + 3 scans per second

Nominal Working Contact to 23"/57.5 cm

Distance
Field Width: 25"/62.5 cm at 23"/57.5 cm from nose of scanner
Print Contrast: 20% minimum reflective difference
Roll: +55 º at 6" on 100% UPC/EAN
Pitch: +50 º at 6" on 100% UPC/EAN
Yaw: +35 º at 6" on 100% UPC/EAN

Additional Information
Decode Capability: All major 1D Codes
User Environment Operating Temperature: 32 º to 104 º F/0 º to 40 º C
Storage Temperature: -40 º to 140 º F/-40 º to 60 º C
Humidity: 5% to 95% relative humidity, noncondensing
Drop Specification: Unit functions normally after repeated 5'/1.5 m drops to concrete
Ambient Light Immunity: Immune to direct exposure of normal office factory lighting conditions, as well as direct exposure to sunlight
  • EMI Generation: Conforms to FCC Class A Limits
  • Electrostatic Discharge: Conforms to 15 KV rating per IEC 801-2
  • ESD and Contamination test and certification on file
  • Regulatory: Complies with UL, CSA, VDE, CE, FCC Class A and B Limits
Results based on polymer analysis. Due to its recent introduction, limited scanning statistics exist. Product performance to date is consistent with these findings. Results are not guaranteed. Actual results may be process-related. Trademarks belong to their respective owners.
Back